BÄREN-Wiki · öffentliche Vorschau

Windows, Fehlercodes und Gerätewissen

Öffentlich sichtbar sind Fehlerquelle und Grundeinstufung. Vollständige Diagnosen, Hersteller- und Praxishinweise sowie Reparaturroutinen erhalten ausschließlich angemeldete Bären-EDV-Techniker.

Windows, Fehlercodes und Gerätewissen

NTSTATUS 0xC01E0323 (STATUS_GRAPHICS_NO_RECOMMENDED_FUNCTIONAL_VIDPN): Miniport does not have any recommendation regarding the request to provide a functional VidPN given the current display adapter configuration.

NTSTATUS 0xC01E0325 (STATUS_GRAPHICS_EMPTY_ADAPTER_MONITOR_MODE_SUPPORT_INTERSECTION): System failed to determine a mode that is supported by both the display adapter and the monitor connected to it.

NTSTATUS 0xC01E0341 (STATUS_GRAPHICS_NO_DISPLAY_MODE_MANAGEMENT_SUPPORT): Failed to acquire display mode management interface.

NTSTATUS 0xC01E0354 (STATUS_GRAPHICS_NO_AVAILABLE_IMPORTANCE_ORDINALS): All available importance ordinals are already used in specified topology.

NTSTATUS 0xC01E035A (STATUS_GRAPHICS_CANCEL_VIDPN_TOPOLOGY_AUGMENTATION): Miniport requested that augmentation be cancelled for the specified source of the specified VidPN's topology.

NTSTATUS 0xC01E0400 (STATUS_GRAPHICS_SPECIFIED_CHILD_ALREADY_CONNECTED): Specified display adapter child device already has an external device connected to it.

NTSTATUS 0xC01E0401 (STATUS_GRAPHICS_CHILD_DESCRIPTOR_NOT_SUPPORTED): Specified display adapter child device does not support descriptor exposure.

NTSTATUS 0xC01E0436 (STATUS_GRAPHICS_INCONSISTENT_DEVICE_LINK_STATE): The adapter link was found to be in an inconsistent state. Not all adapters are in an expected PNP/Power state.

NTSTATUS 0xC01E0438 (STATUS_GRAPHICS_NOT_POST_DEVICE_DRIVER): The driver trying to start is not the same as the driver for the POSTed display adapter.

NTSTATUS 0xC01E0500 (STATUS_GRAPHICS_OPM_NOT_SUPPORTED): The driver does not support OPM.

NTSTATUS 0xC01E0501 (STATUS_GRAPHICS_COPP_NOT_SUPPORTED): The driver does not support COPP.

NTSTATUS 0xC01E0502 (STATUS_GRAPHICS_UAB_NOT_SUPPORTED): The driver does not support UAB.

NTSTATUS 0xC01E0505 (STATUS_GRAPHICS_OPM_NO_PROTECTED_OUTPUTS_EXIST): The GDI display device passed to this function does not have any active protected outputs.

NTSTATUS 0xC01E0511 (STATUS_GRAPHICS_PVP_HFS_FAILED): The function failed because the display adapter's Hardware Functionality Scan failed to validate the graphics hardware.

NTSTATUS 0xC01E0513 (STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_HDCP): The protected output cannot enable the High-bandwidth Digital Content Protection (HDCP) System because it does not support HDCP.

NTSTATUS 0xC01E0514 (STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_ACP): The protected output cannot enable Analogue Copy Protection (ACP) because it does not support ACP.

NTSTATUS 0xC01E0515 (STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_CGMSA): The protected output cannot enable the Content Generation Management System Analogue (CGMS-A) protection technology because it does not support CGMS-A.

NTSTATUS 0xC01E0518 (STATUS_GRAPHICS_OPM_ALL_HDCP_HARDWARE_ALREADY_IN_USE): The DxgkDdiOPMConfigureProtectedOutput function cannot enable HDCP because the display adapter's HDCP hardware is already being used by other physical outputs.

NTSTATUS 0xC01E051E (STATUS_GRAPHICS_OPM_DRIVER_INTERNAL_ERROR): The function failed because an unexpected error occurred inside of a display driver.

NTSTATUS 0xC01E0580 (STATUS_GRAPHICS_I2C_NOT_SUPPORTED): The monitor connected to the specified video output does not have an I2C bus.

NTSTATUS 0xC01E0581 (STATUS_GRAPHICS_I2C_DEVICE_DOES_NOT_EXIST): No device on the I2C bus has the specified address.

NTSTATUS 0xC01E0582 (STATUS_GRAPHICS_I2C_ERROR_TRANSMITTING_DATA): An error occurred while transmitting data to the device on the I2C bus.

NTSTATUS 0xC01E0583 (STATUS_GRAPHICS_I2C_ERROR_RECEIVING_DATA): An error occurred while receiving data from the device on the I2C bus.

NTSTATUS 0xC01E0584 (STATUS_GRAPHICS_DDCCI_VCP_NOT_SUPPORTED): The monitor does not support the specified VCP code.

NTSTATUS 0xC01E0586 (STATUS_GRAPHICS_DDCCI_MONITOR_RETURNED_INVALID_TIMING_STATUS_BYTE): The function failed because a monitor returned an invalid Timing Status byte when the operating system used the DDC/CI Get Timing Report & Timing Message command to get a timing report from a monitor.

NTSTATUS 0xC01E05E1 (STATUS_GRAPHICS_NO_DISPLAY_DEVICE_CORRESPONDS_TO_NAME): This function cannot find an actual GDI display device which corresponds to the specified GDI display device name.

NTSTATUS 0xC01E05E2 (STATUS_GRAPHICS_DISPLAY_DEVICE_NOT_ATTACHED_TO_DESKTOP): The function failed because the specified GDI display device was not attached to the Windows desktop.

NTSTATUS 0xC01E05E3 (STATUS_GRAPHICS_MIRRORING_DEVICES_NOT_SUPPORTED): This function does not support GDI mirroring display devices because GDI mirroring display devices do not have any physical monitors associated with them.

NTSTATUS 0xC01E05E5 (STATUS_GRAPHICS_NO_MONITORS_CORRESPOND_TO_DISPLAY_DEVICE): This function failed because the GDI device passed to it did not have any monitors associated with it.

NTSTATUS 0xC021001C (STATUS_FVE_AUTH_INVALID_CONFIG): The Boot Configuration Data (BCD) settings are not supported or have changed since BitLocker was enabled.

NTSTATUS 0xC0210038 (STATUS_FVE_EDRIVE_DRY_RUN_FAILED): Your computer doesn't support BitLocker hardware-based encryption. Check with your computer manufacturer for firmware updates.

NTSTATUS 0xC0210042 (STATUS_FVE_POLICY_ON_RDV_EXCLUSION_LIST): This removable data drive has been excluded from device encryption by BitLocker Drive Encryption policy.

NTSTATUS 0xC0210057 (STATUS_FVE_HW_ACCELERATED_ENCRYPTION_NOT_ALLOWED): BitLocker is prevented from using hardware accelerated encryption.

NTSTATUS 0xC021005C (STATUS_FVE_FW_UPDATE_PCRS_BLOCK): The firmware update was not applied. To finish installation of the firmware, please suspend BitLocker and restart your device.

NTSTATUS 0xC021005E (STATUS_FVE_FAILED_TO_UNWRAP_HW_WRAPPED_KEY): The hardware crypto key manager failed to unwrap a hardware wrapped key.

NTSTATUS 0xC021005F (STATUS_FVE_HARDWARE_CRYPTO_ACCELERATOR_NOT_FIPS_COMPLIANT): FIPS compliance is required, but the hardware crypto accelerator does not report compliance with this standard.

NTSTATUS 0xC0210060 (STATUS_FVE_HARDWARE_CRYPTO_KEY_MANAGER_NOT_FIPS_COMPLIANT): FIPS compliance is required, but the hardware crypto key manager does not report compliance with this standard.

NTSTATUS 0xC0220014 (STATUS_FWP_INCOMPATIBLE_LAYER): The operation is not supported by the specified layer.

NTSTATUS 0xC0220032 (STATUS_FWP_EM_NOT_SUPPORTED): An IKE policy cannot contain an Extended Mode policy.

NTSTATUS 0xC022003E (STATUS_FWP_L2_DRIVER_NOT_READY): The WFP MAC Layers are not ready.

NTSTATUS 0xC0230010 (STATUS_NDIS_INVALID_DEVICE_REQUEST): The specified request is not a valid operation for the target device.

NTSTATUS 0xC023002C (STATUS_NDIS_UNSUPPORTED_REVISION): The revision number specified in the structure is not supported.

NTSTATUS 0xC023002F (STATUS_NDIS_LOW_POWER_STATE): The miniport adapter is in lower power state.

NTSTATUS 0xC0230030 (STATUS_NDIS_REINIT_REQUIRED): This operation requires the miniport adapter to be reinitialized.

NTSTATUS 0xC0290000 (STATUS_TPM_ERROR_MASK): This is an error mask to convert TPM hardware errors to win errors.

NTSTATUS 0xC029001C (STATUS_TPM_FAILEDSELFTEST): TPM 1.2: The TPM hardware device reported a failure during its internal self test. Try restarting the computer to resolve the problem. If the problem continues, you might need to replace your TPM hardware or motherboard.

NTSTATUS 0xC0290028 (STATUS_TPM_BAD_KEY_PROPERTY): TPM 1.2: The key properties in TPM_KEY_PARMs are not supported by this TPM.