BÄREN-Wiki · öffentliche Vorschau

Windows, Fehlercodes und Gerätewissen

Öffentlich sichtbar sind Fehlerquelle und Grundeinstufung. Vollständige Diagnosen, Hersteller- und Praxishinweise sowie Reparaturroutinen erhalten ausschließlich angemeldete Bären-EDV-Techniker.

Windows, Fehlercodes und Gerätewissen

NTSTATUS 0xC01E0356 (STATUS_GRAPHICS_INVALID_MODE_PRUNING_ALGORITHM): Specified mode pruning algorithm is invalid

NTSTATUS 0xC01E0357 (STATUS_GRAPHICS_INVALID_MONITOR_CAPABILITY_ORIGIN): Specified monitor capability origin is invalid.

NTSTATUS 0xC01E0358 (STATUS_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGE_CONSTRAINT): Specified monitor frequency range constraint is invalid.

NTSTATUS 0xC01E0359 (STATUS_GRAPHICS_MAX_NUM_PATHS_REACHED): Maximum supported number of present paths has been reached.

NTSTATUS 0xC01E035A (STATUS_GRAPHICS_CANCEL_VIDPN_TOPOLOGY_AUGMENTATION): Miniport requested that augmentation be cancelled for the specified source of the specified VidPN's topology.

NTSTATUS 0xC01E035B (STATUS_GRAPHICS_INVALID_CLIENT_TYPE): Specified client type was not recognized.

NTSTATUS 0xC01E035C (STATUS_GRAPHICS_CLIENTVIDPN_NOT_SET): Client VidPN is not set on this adapter (e.g. no user mode initiated mode changes took place on this adapter yet).

NTSTATUS 0xC01E0400 (STATUS_GRAPHICS_SPECIFIED_CHILD_ALREADY_CONNECTED): Specified display adapter child device already has an external device connected to it.

NTSTATUS 0xC01E0401 (STATUS_GRAPHICS_CHILD_DESCRIPTOR_NOT_SUPPORTED): Specified display adapter child device does not support descriptor exposure.

NTSTATUS 0xC01E0430 (STATUS_GRAPHICS_NOT_A_LINKED_ADAPTER): The display adapter is not linked to any other adapters.

NTSTATUS 0xC01E0431 (STATUS_GRAPHICS_LEADLINK_NOT_ENUMERATED): Lead adapter in a linked configuration was not enumerated yet.

NTSTATUS 0xC01E0432 (STATUS_GRAPHICS_CHAINLINKS_NOT_ENUMERATED): Some chain adapters in a linked configuration were not enumerated yet.

NTSTATUS 0xC01E0433 (STATUS_GRAPHICS_ADAPTER_CHAIN_NOT_READY): The chain of linked adapters is not ready to start because of an unknown failure.

NTSTATUS 0xC01E0434 (STATUS_GRAPHICS_CHAINLINKS_NOT_STARTED): An attempt was made to start a lead link display adapter when the chain links were not started yet.

NTSTATUS 0xC01E0435 (STATUS_GRAPHICS_CHAINLINKS_NOT_POWERED_ON): An attempt was made to power up a lead link display adapter when the chain links were powered down.

NTSTATUS 0xC01E0436 (STATUS_GRAPHICS_INCONSISTENT_DEVICE_LINK_STATE): The adapter link was found to be in an inconsistent state. Not all adapters are in an expected PNP/Power state.

NTSTATUS 0xC01E0438 (STATUS_GRAPHICS_NOT_POST_DEVICE_DRIVER): The driver trying to start is not the same as the driver for the POSTed display adapter.

NTSTATUS 0xC01E043B (STATUS_GRAPHICS_ADAPTER_ACCESS_NOT_EXCLUDED): An operation is being attempted that requires the display adapter to be in a quiescent state.

NTSTATUS 0xC01E0500 (STATUS_GRAPHICS_OPM_NOT_SUPPORTED): The driver does not support OPM.

NTSTATUS 0xC01E0501 (STATUS_GRAPHICS_COPP_NOT_SUPPORTED): The driver does not support COPP.

NTSTATUS 0xC01E0502 (STATUS_GRAPHICS_UAB_NOT_SUPPORTED): The driver does not support UAB.

NTSTATUS 0xC01E0503 (STATUS_GRAPHICS_OPM_INVALID_ENCRYPTED_PARAMETERS): The specified encrypted parameters are invalid.

NTSTATUS 0xC01E0505 (STATUS_GRAPHICS_OPM_NO_PROTECTED_OUTPUTS_EXIST): The GDI display device passed to this function does not have any active protected outputs.

NTSTATUS 0xC01E050B (STATUS_GRAPHICS_OPM_INTERNAL_ERROR): An internal error caused an operation to fail.

NTSTATUS 0xC01E050C (STATUS_GRAPHICS_OPM_INVALID_HANDLE): The function failed because the caller passed in an invalid OPM user mode handle.

NTSTATUS 0xC01E050E (STATUS_GRAPHICS_PVP_INVALID_CERTIFICATE_LENGTH): A certificate could not be returned because the certificate buffer passed to the function was too small.

NTSTATUS 0xC01E050F (STATUS_GRAPHICS_OPM_SPANNING_MODE_ENABLED): The DxgkDdiOpmCreateProtectedOutput function could not create a protected output because the Video Present Target is in spanning mode.

NTSTATUS 0xC01E0510 (STATUS_GRAPHICS_OPM_THEATER_MODE_ENABLED): The DxgkDdiOpmCreateProtectedOutput function could not create a protected output because the Video Present Target is in theater mode.

NTSTATUS 0xC01E0511 (STATUS_GRAPHICS_PVP_HFS_FAILED): The function failed because the display adapter's Hardware Functionality Scan failed to validate the graphics hardware.

NTSTATUS 0xC01E0512 (STATUS_GRAPHICS_OPM_INVALID_SRM): The HDCP System Renewability Message passed to this function did not comply with section 5 of the HDCP 1.1 specification.

NTSTATUS 0xC01E0513 (STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_HDCP): The protected output cannot enable the High-bandwidth Digital Content Protection (HDCP) System because it does not support HDCP.

NTSTATUS 0xC01E0514 (STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_ACP): The protected output cannot enable Analogue Copy Protection (ACP) because it does not support ACP.

NTSTATUS 0xC01E0515 (STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_CGMSA): The protected output cannot enable the Content Generation Management System Analogue (CGMS-A) protection technology because it does not support CGMS-A.

NTSTATUS 0xC01E0516 (STATUS_GRAPHICS_OPM_HDCP_SRM_NEVER_SET): The DxgkDdiOPMGetInformation function cannot return the version of the SRM being used because the application never successfully passed an SRM to the protected output.

NTSTATUS 0xC01E0517 (STATUS_GRAPHICS_OPM_RESOLUTION_TOO_HIGH): The DxgkDdiOPMConfigureProtectedOutput function cannot enable the specified output protection technology because the output's screen resolution is too high.

NTSTATUS 0xC01E0518 (STATUS_GRAPHICS_OPM_ALL_HDCP_HARDWARE_ALREADY_IN_USE): The DxgkDdiOPMConfigureProtectedOutput function cannot enable HDCP because the display adapter's HDCP hardware is already being used by other physical outputs.

NTSTATUS 0xC01E051D (STATUS_GRAPHICS_OPM_INVALID_INFORMATION_REQUEST): The DxgkDdiOPMGetInformation and DxgkDdiOPMGetCOPPCompatibleInformation functions return this error code if the passed in sequence number is not the expected sequence number or the passed in OMAC value is invalid.

NTSTATUS 0xC01E051E (STATUS_GRAPHICS_OPM_DRIVER_INTERNAL_ERROR): The function failed because an unexpected error occurred inside of a display driver.

NTSTATUS 0xC01E0521 (STATUS_GRAPHICS_OPM_INVALID_CONFIGURATION_REQUEST): The DxgkDdiOPMConfigureProtectedOutput function returns this error code if the passed in sequence number is not the expected sequence number or the passed in OMAC value is invalid.

NTSTATUS 0xC01E0580 (STATUS_GRAPHICS_I2C_NOT_SUPPORTED): The monitor connected to the specified video output does not have an I2C bus.

NTSTATUS 0xC01E0581 (STATUS_GRAPHICS_I2C_DEVICE_DOES_NOT_EXIST): No device on the I2C bus has the specified address.

NTSTATUS 0xC01E0582 (STATUS_GRAPHICS_I2C_ERROR_TRANSMITTING_DATA): An error occurred while transmitting data to the device on the I2C bus.

NTSTATUS 0xC01E0583 (STATUS_GRAPHICS_I2C_ERROR_RECEIVING_DATA): An error occurred while receiving data from the device on the I2C bus.

NTSTATUS 0xC01E0584 (STATUS_GRAPHICS_DDCCI_VCP_NOT_SUPPORTED): The monitor does not support the specified VCP code.