BÄREN-Wiki · öffentliche Vorschau

Windows, Fehlercodes und Gerätewissen

Öffentlich sichtbar sind Fehlerquelle und Grundeinstufung. Vollständige Diagnosen, Hersteller- und Praxishinweise sowie Reparaturroutinen erhalten ausschließlich angemeldete Bären-EDV-Techniker.

Windows, Fehlercodes und Gerätewissen

NTSTATUS 0xC01E0438 (STATUS_GRAPHICS_NOT_POST_DEVICE_DRIVER): The driver trying to start is not the same as the driver for the POSTed display adapter.

NTSTATUS 0xC01E043B (STATUS_GRAPHICS_ADAPTER_ACCESS_NOT_EXCLUDED): An operation is being attempted that requires the display adapter to be in a quiescent state.

NTSTATUS 0xC01E0500 (STATUS_GRAPHICS_OPM_NOT_SUPPORTED): The driver does not support OPM.

NTSTATUS 0xC01E0501 (STATUS_GRAPHICS_COPP_NOT_SUPPORTED): The driver does not support COPP.

NTSTATUS 0xC01E0502 (STATUS_GRAPHICS_UAB_NOT_SUPPORTED): The driver does not support UAB.

NTSTATUS 0xC01E0503 (STATUS_GRAPHICS_OPM_INVALID_ENCRYPTED_PARAMETERS): The specified encrypted parameters are invalid.

NTSTATUS 0xC01E0505 (STATUS_GRAPHICS_OPM_NO_PROTECTED_OUTPUTS_EXIST): The GDI display device passed to this function does not have any active protected outputs.

NTSTATUS 0xC01E050B (STATUS_GRAPHICS_OPM_INTERNAL_ERROR): An internal error caused an operation to fail.

NTSTATUS 0xC01E050C (STATUS_GRAPHICS_OPM_INVALID_HANDLE): The function failed because the caller passed in an invalid OPM user mode handle.

NTSTATUS 0xC01E050E (STATUS_GRAPHICS_PVP_INVALID_CERTIFICATE_LENGTH): A certificate could not be returned because the certificate buffer passed to the function was too small.

NTSTATUS 0xC01E050F (STATUS_GRAPHICS_OPM_SPANNING_MODE_ENABLED): The DxgkDdiOpmCreateProtectedOutput function could not create a protected output because the Video Present Target is in spanning mode.

NTSTATUS 0xC01E0510 (STATUS_GRAPHICS_OPM_THEATER_MODE_ENABLED): The DxgkDdiOpmCreateProtectedOutput function could not create a protected output because the Video Present Target is in theater mode.

NTSTATUS 0xC01E0511 (STATUS_GRAPHICS_PVP_HFS_FAILED): The function failed because the display adapter's Hardware Functionality Scan failed to validate the graphics hardware.

NTSTATUS 0xC01E0512 (STATUS_GRAPHICS_OPM_INVALID_SRM): The HDCP System Renewability Message passed to this function did not comply with section 5 of the HDCP 1.1 specification.

NTSTATUS 0xC01E0513 (STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_HDCP): The protected output cannot enable the High-bandwidth Digital Content Protection (HDCP) System because it does not support HDCP.

NTSTATUS 0xC01E0514 (STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_ACP): The protected output cannot enable Analogue Copy Protection (ACP) because it does not support ACP.

NTSTATUS 0xC01E0515 (STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_CGMSA): The protected output cannot enable the Content Generation Management System Analogue (CGMS-A) protection technology because it does not support CGMS-A.

NTSTATUS 0xC01E0516 (STATUS_GRAPHICS_OPM_HDCP_SRM_NEVER_SET): The DxgkDdiOPMGetInformation function cannot return the version of the SRM being used because the application never successfully passed an SRM to the protected output.

NTSTATUS 0xC01E0517 (STATUS_GRAPHICS_OPM_RESOLUTION_TOO_HIGH): The DxgkDdiOPMConfigureProtectedOutput function cannot enable the specified output protection technology because the output's screen resolution is too high.

NTSTATUS 0xC01E0518 (STATUS_GRAPHICS_OPM_ALL_HDCP_HARDWARE_ALREADY_IN_USE): The DxgkDdiOPMConfigureProtectedOutput function cannot enable HDCP because the display adapter's HDCP hardware is already being used by other physical outputs.

NTSTATUS 0xC01E051D (STATUS_GRAPHICS_OPM_INVALID_INFORMATION_REQUEST): The DxgkDdiOPMGetInformation and DxgkDdiOPMGetCOPPCompatibleInformation functions return this error code if the passed in sequence number is not the expected sequence number or the passed in OMAC value is invalid.

NTSTATUS 0xC01E051E (STATUS_GRAPHICS_OPM_DRIVER_INTERNAL_ERROR): The function failed because an unexpected error occurred inside of a display driver.

NTSTATUS 0xC01E0521 (STATUS_GRAPHICS_OPM_INVALID_CONFIGURATION_REQUEST): The DxgkDdiOPMConfigureProtectedOutput function returns this error code if the passed in sequence number is not the expected sequence number or the passed in OMAC value is invalid.

NTSTATUS 0xC01E0580 (STATUS_GRAPHICS_I2C_NOT_SUPPORTED): The monitor connected to the specified video output does not have an I2C bus.

NTSTATUS 0xC01E0581 (STATUS_GRAPHICS_I2C_DEVICE_DOES_NOT_EXIST): No device on the I2C bus has the specified address.

NTSTATUS 0xC01E0582 (STATUS_GRAPHICS_I2C_ERROR_TRANSMITTING_DATA): An error occurred while transmitting data to the device on the I2C bus.

NTSTATUS 0xC01E0583 (STATUS_GRAPHICS_I2C_ERROR_RECEIVING_DATA): An error occurred while receiving data from the device on the I2C bus.

NTSTATUS 0xC01E0584 (STATUS_GRAPHICS_DDCCI_VCP_NOT_SUPPORTED): The monitor does not support the specified VCP code.

NTSTATUS 0xC01E0585 (STATUS_GRAPHICS_DDCCI_INVALID_DATA): The data received from the monitor is invalid.

NTSTATUS 0xC01E0586 (STATUS_GRAPHICS_DDCCI_MONITOR_RETURNED_INVALID_TIMING_STATUS_BYTE): The function failed because a monitor returned an invalid Timing Status byte when the operating system used the DDC/CI Get Timing Report & Timing Message command to get a timing report from a monitor.

NTSTATUS 0xC01E0587 (STATUS_GRAPHICS_DDCCI_INVALID_CAPABILITIES_STRING): A monitor returned a DDC/CI capabilities string which did not comply with the ACCESS.bus 3.0, DDC/CI 1.1, or MCCS 2 Revision 1 specification.

NTSTATUS 0xC01E0588 (STATUS_GRAPHICS_MCA_INTERNAL_ERROR): An internal error caused an operation to fail.

NTSTATUS 0xC01E0589 (STATUS_GRAPHICS_DDCCI_INVALID_MESSAGE_COMMAND): An operation failed because a DDC/CI message had an invalid value in its command field.

NTSTATUS 0xC01E058A (STATUS_GRAPHICS_DDCCI_INVALID_MESSAGE_LENGTH): An error occurred because the field length of a DDC/CI message contained an invalid value.

NTSTATUS 0xC01E058B (STATUS_GRAPHICS_DDCCI_INVALID_MESSAGE_CHECKSUM): An error occurred because the checksum field in a DDC/CI message did not match the message's computed checksum value. This error implies that the data was corrupted while it was being transmitted from a monitor to a computer.

NTSTATUS 0xC01E058C (STATUS_GRAPHICS_INVALID_PHYSICAL_MONITOR_HANDLE): This function failed because an invalid monitor handle was passed to it.

NTSTATUS 0xC01E05E0 (STATUS_GRAPHICS_ONLY_CONSOLE_SESSION_SUPPORTED): This function can only be used if a program is running in the local console session. It cannot be used if a program is running on a remote desktop session or on a terminal server session.

NTSTATUS 0xC01E05E1 (STATUS_GRAPHICS_NO_DISPLAY_DEVICE_CORRESPONDS_TO_NAME): This function cannot find an actual GDI display device which corresponds to the specified GDI display device name.

NTSTATUS 0xC01E05E2 (STATUS_GRAPHICS_DISPLAY_DEVICE_NOT_ATTACHED_TO_DESKTOP): The function failed because the specified GDI display device was not attached to the Windows desktop.

NTSTATUS 0xC01E05E3 (STATUS_GRAPHICS_MIRRORING_DEVICES_NOT_SUPPORTED): This function does not support GDI mirroring display devices because GDI mirroring display devices do not have any physical monitors associated with them.

NTSTATUS 0xC01E05E4 (STATUS_GRAPHICS_INVALID_POINTER): The function failed because an invalid pointer parameter was passed to it. A pointer parameter is invalid if it is NULL, it points to an invalid address, it points to a kernel mode address or it is not correctly aligned.

NTSTATUS 0xC01E05E5 (STATUS_GRAPHICS_NO_MONITORS_CORRESPOND_TO_DISPLAY_DEVICE): This function failed because the GDI device passed to it did not have any monitors associated with it.

NTSTATUS 0xC01E05E6 (STATUS_GRAPHICS_PARAMETER_ARRAY_TOO_SMALL): An array passed to the function cannot hold all of the data that the function must copy into the array.