BÄREN-Wiki · öffentliche Vorschau

Windows, Fehlercodes und Gerätewissen

Öffentlich sichtbar sind Fehlerquelle und Grundeinstufung. Vollständige Diagnosen, Hersteller- und Praxishinweise sowie Reparaturroutinen erhalten ausschließlich angemeldete Bären-EDV-Techniker.

Windows, Fehlercodes und Gerätewissen

NTSTATUS 0xC02900A1 (STATUS_TPM_20_E_RESERVED_BITS): TPM 2.0: Reserved bits not set to zero as required.

NTSTATUS 0xC02900A2 (STATUS_TPM_20_E_BAD_AUTH): TPM 2.0: Authorization failure without DA implications.

NTSTATUS 0xC02900A3 (STATUS_TPM_20_E_EXPIRED): TPM 2.0: The policy has expired.

NTSTATUS 0xC02900A4 (STATUS_TPM_20_E_POLICY_CC): TPM 2.0: The command code in the policy is not the command code of the command or the command code in a policy command references a command that is not implemented.

NTSTATUS 0xC02900A5 (STATUS_TPM_20_E_BINDING): TPM 2.0: Public and sensitive portions of an object are not cryptographically bound.

NTSTATUS 0xC02900A6 (STATUS_TPM_20_E_CURVE): TPM 2.0: Curve not supported.

NTSTATUS 0xC02900A7 (STATUS_TPM_20_E_ECC_POINT): TPM 2.0: Point is not on the required curve.

NTSTATUS 0xC0290100 (STATUS_TPM_20_E_INITIALIZE): TPM 2.0: TPM not initialized.

NTSTATUS 0xC0290101 (STATUS_TPM_20_E_FAILURE): TPM 2.0: Commands not being accepted because of a TPM failure.

NTSTATUS 0xC0290103 (STATUS_TPM_20_E_SEQUENCE): TPM 2.0: Improper use of a sequence handle.

NTSTATUS 0xC029010B (STATUS_TPM_20_E_PRIVATE): TPM 2.0: TPM_RC_PRIVATE error.

NTSTATUS 0xC0290119 (STATUS_TPM_20_E_HMAC): TPM 2.0: TPM_RC_HMAC.

NTSTATUS 0xC0290120 (STATUS_TPM_20_E_DISABLED): TPM 2.0: TPM_RC_DISABLED.

NTSTATUS 0xC0290121 (STATUS_TPM_20_E_EXCLUSIVE): TPM 2.0: Command failed because audit sequence required exclusivity.

NTSTATUS 0xC0290123 (STATUS_TPM_20_E_ECC_CURVE): TPM 2.0: Unsupported ECC curve.

NTSTATUS 0xC0290124 (STATUS_TPM_20_E_AUTH_TYPE): TPM 2.0: Authorization handle is not correct for command.

NTSTATUS 0xC0290125 (STATUS_TPM_20_E_AUTH_MISSING): TPM 2.0: Command requires an authorization session for handle and is not present.

NTSTATUS 0xC0290126 (STATUS_TPM_20_E_POLICY): TPM 2.0: Policy failure in Math Operation or an invalid authPolicy value.

NTSTATUS 0xC0290127 (STATUS_TPM_20_E_PCR): TPM 2.0: PCR check fail.

NTSTATUS 0xC0290128 (STATUS_TPM_20_E_PCR_CHANGED): TPM 2.0: PCR have changed since checked.

NTSTATUS 0xC029012D (STATUS_TPM_20_E_UPGRADE): TPM 2.0: The TPM is not in the right mode for upgrade.

NTSTATUS 0xC029012E (STATUS_TPM_20_E_TOO_MANY_CONTEXTS): TPM 2.0: Context ID counter is at maximum.

NTSTATUS 0xC029012F (STATUS_TPM_20_E_AUTH_UNAVAILABLE): TPM 2.0: authValue or authPolicy is not available for selected entity.

NTSTATUS 0xC0290130 (STATUS_TPM_20_E_REBOOT): TPM 2.0: A _TPM_Init and Startup(CLEAR) is required before the TPM can resume operation.

NTSTATUS 0xC0290131 (STATUS_TPM_20_E_UNBALANCED): TPM 2.0: The protection algorithms (hash and symmetric) are not reasonably balanced. The digest size of the hash must be larger than the key size of the symmetric algorithm.

NTSTATUS 0xC0290142 (STATUS_TPM_20_E_COMMAND_SIZE): TPM 2.0: The TPM command's commandSize value is inconsistent with contents of the command buffer; either the size is not the same as the bytes loaded by the hardware interface layer or the value is not large enough to hold a command header.

NTSTATUS 0xC0290143 (STATUS_TPM_20_E_COMMAND_CODE): TPM 2.0: Command code not supported.

NTSTATUS 0xC0290144 (STATUS_TPM_20_E_AUTHSIZE): TPM 2.0: The value of authorizationSize is out of range or the number of octets in the authorization Area is greater than required.

NTSTATUS 0xC0290145 (STATUS_TPM_20_E_AUTH_CONTEXT): TPM 2.0: Use of an authorization session with a context command or another command that cannot have an authorization session.

NTSTATUS 0xC0290146 (STATUS_TPM_20_E_NV_RANGE): TPM 2.0: NV offset+size is out of range.

NTSTATUS 0xC0290147 (STATUS_TPM_20_E_NV_SIZE): TPM 2.0: Requested allocation size is larger than allowed.

NTSTATUS 0xC0290148 (STATUS_TPM_20_E_NV_LOCKED): TPM 2.0: NV access locked.

NTSTATUS 0xC0290149 (STATUS_TPM_20_E_NV_AUTHORIZATION): TPM 2.0: NV access authorization fails in command actions

NTSTATUS 0xC029014A (STATUS_TPM_20_E_NV_UNINITIALIZED): TPM 2.0: An NV index is used before being initialized or the state saved by TPM2_Shutdown(STATE) could not be restored.

NTSTATUS 0xC029014B (STATUS_TPM_20_E_NV_SPACE): TPM 2.0: Insufficient space for NV allocation.

NTSTATUS 0xC029014C (STATUS_TPM_20_E_NV_DEFINED): TPM 2.0: NV index or persistent object already defined.

NTSTATUS 0xC0290150 (STATUS_TPM_20_E_BAD_CONTEXT): TPM 2.0: Context in TPM2_ContextLoad() is not valid.

NTSTATUS 0xC0290151 (STATUS_TPM_20_E_CPHASH): TPM 2.0: chHash value already set or not correct for use.

NTSTATUS 0xC0290152 (STATUS_TPM_20_E_PARENT): TPM 2.0: Handle for parent is not a valid parent.

NTSTATUS 0xC0290153 (STATUS_TPM_20_E_NEEDS_TEST): TPM 2.0: Some function needs testing.

NTSTATUS 0xC0290154 (STATUS_TPM_20_E_NO_RESULT): TPM 2.0: returned when an internal function cannot process a request due to an unspecified problem. This code is usually related to invalid parameters that are not properly filtered by the input unmarshaling code.

NTSTATUS 0xC0290155 (STATUS_TPM_20_E_SENSITIVE): TPM 2.0: The sensitive area did not unmarshal correctly after decryption - this code is used in lieu of the other unmarshaling errors so that an attacker cannot determine where the unmarshaling error occurred.

NTSTATUS 0xC0290400 (STATUS_TPM_COMMAND_BLOCKED): The command was blocked.

NTSTATUS 0xC0290401 (STATUS_TPM_INVALID_HANDLE): The specified handle was not found.

NTSTATUS 0xC0290402 (STATUS_TPM_DUPLICATE_VHANDLE): The TPM returned a duplicate handle and the command needs to be resubmitted.

NTSTATUS 0xC0290403 (STATUS_TPM_EMBEDDED_COMMAND_BLOCKED): The command within the transport was blocked.

NTSTATUS 0xC0290404 (STATUS_TPM_EMBEDDED_COMMAND_UNSUPPORTED): The command within the transport is not supported.

NTSTATUS 0xC0290800 (STATUS_TPM_RETRY): The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time.